
D28 · Mass Landed
Seletar Hills stairlift briefs are value-oriented: the typical installation targets an elderly parent on a sensible budget, where a stairlift is preferred over the larger investment of a lift.
Why Seletar Hills
Staircases here are typically straight or single-turn, suiting standard rail solutions without expensive custom bending. Reconditioned units are commonly requested as a budget-conscious alternative to new installations, and straight rails mount directly to the treads, which keeps installation simple.
Value-tier scope for most installations. Straight rails dominate, and reconditioned units are a regular request from cost-conscious families. We quote each staircase after a free site assessment.
A reconditioned unit on a straight flight is a legitimate way to solve the problem on a budget, provided the rail is cut and fitted for this staircase and the warranty terms are clear. Where the budget stretches, a new unit earns it back in battery life and quieter running.
Common Questions
Whoever sells you the chair, BCA tells owners to have a stairlift fitted by a registered lift installation contractor and serviced by a registered lift maintenance contractor. You can look a firm up in BCA's directory of registered contractors, and a company registration number (UEN) on its own does not qualify a firm for this work. Once the stairs are measured, get the model, the rail, where the chair parks at each end and the full installed price in writing before you pay a deposit.
Start with the shape of your stairs. A straight flight takes a straight rail, which Stannah cuts to length from mass-produced rail. Stairs that turn or have a landing partway are likely to need a curved rail, and Stannah makes its curved rails to measure for each staircase, a more complicated job than a straight one. A rail end that folds out of the way of a door at the bottom (Stannah's hinged rail), a second flight or an outdoor model also change the price. When you compare quotes, check whether each one includes fitting and the Permit to Operate application. Then there are the yearly costs. BCA requires servicing at the maker's recommended interval, or every three months if none is given, and an inspection and test every year with an independent engineer or inspector present. A firm price needs the stairs measured.
A seated stairlift means getting out of the wheelchair at one end and into a seat or a second wheelchair at the other. If those transfers are unsafe or impractical, look at a lift that carries the wheelchair, and the route to it, rather than assuming a chair lift solves the access problem.
Yes, if it climbs a full flight. Stairlifts are regulated as fixed installations, and the exemption for small home stairlifts applies only when all three conditions are met. It rises less than 1,000 mm, it presses down with less than 150 newtons as it moves down, and it serves a single home. A full flight between floors rises more than that, so it needs BCA's Permit to Operate before anyone uses it.
Renting or buying used doesn't change the rules. The stairlift still needs a BCA-registered contractor to install and service it, and a Permit to Operate before anyone uses it. With a used curved rail, the catch is fit. Stannah makes each curved rail to measure for one staircase, so one taken from another house can't be assumed to fit yours.
With Stannah's rails, it means a few screw holes in the treads and nothing fixed to the walls. Stannah fixes the rail to the stair treads, not the wall, with screws holding its legs to the treads, typically on every other stair. Those holes need filling when the stairlift comes out, so ask where the fixings will go on your stairs and how they will be made good.
Have a different question? See the full Stairlifts guide or WhatsApp us.
Get Started
Tell us about your stairlifts project in Seletar Hills. We'll arrange a free site assessment and provide a detailed, no-obligation quotation.
Also Serving